The Fenix PD36R Pro hand-held tactical flashlight is an improved version of the Fenix PD36R and features an impressive light brightness of up to 2800 lumens, which is almost 2 times the power of the base model. The device is designed on the basis of modern Fenix APF (Advanced Pulse Frequency) technology. It allows you to avoid limiting the current without negative consequences for the service life of the internal electronics and increase the performance of the lantern to the maximum.

The Luminus SFT70 white LED generates bright light with a range of 380 meters. The resource of the diode is about 50 thousand hours. The flashlight is powered by a 21700 Fenix ARB-L21 V2.0 Li-ion battery with a capacity of 5000 mAh. The battery is recharged using a charging cable that connects directly to the case with a built-in USB Type-C port. Charging time is 3 hours. If necessary, the battery from the kit can be replaced with one of the branded batteries: ARB-L21-5000U or ARB-L21-4000P.

The charging port is covered with a silicone plug to prevent water droplets and dust from entering. The charging process can be monitored using a color indicator that lights up in green or red depending on the degree of battery charge.

Below – more details about the capabilities of the lantern:
1. Management. A pair of switches located in the tail part of the case is used for control. The buttons are of different size and surface so that the user does not confuse them in the dark: a round tactical switch with a rough surface and a smooth function switch in the shape of an oval.

On/Off: Push the tactical switch until it clicks.
Instant activation: half-press the tactical button.
Changing the operating mode: pressing the function switch.
Momentary Strobe: Clamping the function switch.
Strobe activation in permanent mode: pressing the function switch for 0.5 seconds. If pressed again, the constant light mode is activated.
2. Lighting modes:

Turbo: 2800 lumens – 380 meters – 3 hours 30 minutes;
Maximum: 1000 lumens – 225 meters – 3 hours 55 minutes;
Average: 350 lumens – 130 meters – 8 hours 15 minutes;
Minimum: 150 lumens – 90 meters – 19 hours;
Eco: 30 lumens – 40 meters – 42 hours;
Strobe: 2500 lumens.
The model has a memory of the last used mode, so at the next activation, the user does not need to search again for the light of the required power.

3. Physical parameters of the model. The body is made of wear-resistant aluminum alloy A6061-T6, which is strong and resistant to mechanical influences. The metal does not deform during impacts and guarantees the protection of the internal electronics in case the lantern falls from a height of about 1.5 meters. The case is completely sealed – this is indicated by the IP68 moisture protection class, which allows you to submerge the device under water repeatedly without endangering its performance. The body dimensions are 145.8 x 26.5 x 25.7 millimeters. Weight including the battery does not exceed 169 grams.

Characteristics:

tactical hand torch;
LED type – white Luminus SFT70;
maximum brightness – 2800 lumens;
6 light modes are available;
the maximum working time is 42 hours;
control using two buttons in the tail of the case;
power source – Fenix ARB-L21-5000 V2.0 (can be replaced with ARB-L21-5000U or ARB-L21-4000P);
color indication of battery charge level;
the body is made of anodized aluminum alloy A6061-T6;
impact resistance – 1.5 meters;
moisture protection class – IP68;
dimensions are 145.8 x 26.5 x 25.7 mm;
weight – 169 g (including the battery).
Complete set. PD36R Pro RED flashlight, ARB-L21-5000 V2.0 battery, USB Type-C charging cable, spare O-ring, Velcro case, lanyard, user manual, warranty card.